Products / Battery Modules
Modules built to your configuration
Module-level product for OEMs building their own pack or system. Cell chemistry, mechanical design, and BMS-ready termination, ready to drop into your architecture.
Standard Module Families
Three building blocks for most pack architectures
Pre-engineered families you can spec today. Production lead times shorter than a full custom program.
48V LFP Module Family
Motive power and small ESS. 48V nominal, 100–300 Ah options, LFP chemistry for 4,000–6,000+ cycle life. Balance leads, NTC, and high-current terminals included.
400V Pack-Building Block
Mid-voltage module for stacked 400V pack architectures. Configurable capacity, LFP or NMC, common mechanical interface so the same enclosure accepts either chemistry.
High-Voltage Modules
For 600–800V packs where weight and energy density matter. NMC and NCA chemistries at 200–300 Wh/kg. Engineered for vehicle and high-power industrial applications.
Custom Module Engineering
When the standard families don't fit your pack
Send the duty cycle, envelope, and interface. The module is engineered around it.
Chemistry Selection
LFP, NMC, NCA, or Sodium-Ion, matched to your application. Cycle life, energy density, safety profile, cost, and temperature range weighed against your duty cycle.
Form Factor
Prismatic, pouch, or cylindrical cells, selected by application. Mechanical envelope, fastening pattern, and cooling interface engineered to fit the pack you're building.
BMS-Ready
Every module ships with balance leads, cell-level NTC, and high-current terminals. Works with your BMS or ours — CAN, RS485, and Modbus firmware supported.
Certification-Ready
UN 38.3 and IEC 62619 testing in-house
Modules ship with transport and product safety documentation attached. DOT Class 9 compliant for domestic and international shipment.
UN 38.3
Transport safety testing — altitude, thermal cycling, vibration, shock, short circuit, impact, overcharge, and forced discharge. Test summary delivered with every module shipment.
IEC 62619
International product safety standard for industrial lithium cells and batteries. Required in markets outside North America and referenced in U.S. projects.
DOT Compliant
Class 9 Dangerous Goods classification, UN-certified packaging, hazmat declaration, and SDS prepared before the module leaves the line.
Timeline & Traceability
Spec-to-sample in 4 to 8 weeks
100% lot traceability from raw material to finished module. A field issue traces to the production lot and a corrective action.
4 to 8 Weeks
From spec in hand to a module on your bench in 4 to 8 weeks. Built to production-intent specs, not a one-off prototype.
100% Lot Traceability
Cathode, anode, separator, and electrolyte tied to a traceable lot number. Every cell, every module, every production batch.
Production QA on Every Cell
100% of cells capacity-graded and internal-resistance tested before module build. SPC on every line. Full test reports ship with every order.
Start a Module Program
Send the spec. We build the module.
Tell us voltage, capacity, envelope, and interface. Back comes a chemistry recommendation, sample timeline, and landed-cost quote.